Titanium Forging
An yi amfani da jabun titanium sau da yawa saboda ƙarfinsa da juriyar lalata, da kuma kasancewa mafi dacewa da kowane ƙarfe.Daga ma'adinan titanium da aka haƙa, kashi 95% ana amfani da shi don kera titanium dioxide, wanda shine pigment da ake amfani dashi a cikin fenti, robobi da kayan kwalliya.Daga cikin ma'adanai da suka rage, kashi 5 cikin dari ne kawai ake tacewa zuwa karfen titanium.Titanium yana da mafi girman ƙarfi zuwa rabo mai yawa na kowane ƙarfe;kuma ƙarfinsa yana ba da kyakkyawan tsayin daka da juriya ga lalata. Sau da yawa, buƙatun ɓangaren titanium ƙirƙira ba sa bin ka'idodin gama gari amma an yi su don dacewa da bukatun abokin ciniki.
| Saukewa: ASTM B381 | Saukewa: T-9047 | Farashin 4928 |
| Farashin 4930 | ASTM F67 | ASTM F136 |
Ƙirƙirar mashaya/shafa: φ30-400mm
Fayil na ƙirƙira: φ50-1100mm
Jariri hannun riga/ zobe: φ100-3000mm
Katangar ƙirƙira: murabba'ai ko rectangles har zuwa faɗin 1200mm.
| Darasi na 1, 2, 3, 4 | Tsaftace Kasuwanci |
| Darasi na 5 | Ti-6Al-4V |
| Darasi na 7 | Ti-0.2Pd |
| Darasi na 9 | Ti-3Al-2.5V |
| Darasi na 11 | TI-0.2 Pd ELI |
| Darasi na 12 | Ti-0.3Mo-0.8Ni |
| Darasi na 23 | Ti-6Al-4V ELI |
| Farashin 6242 | Ti6AL2Sn4Zr2Mo |
| Ti662 | Ti6AL6V2Sn |
| Ti811 | Ti8Al1Mo1V |
| Ti 6246 | Ti6AL2Sn4Zr6Mo |
| Ti15-3-33 | Saukewa: Ti15V3Cr3Sn3AL |
Karɓar mashaya/shafi, fayafai jabu, jabun hannun riga/ zobe, Jujjuya block
A cikin aikace-aikacen samfuran kayan titanium daban-daban, ana amfani da jabu galibi don fayafai injin turbin gas da ƙasusuwan wucin gadi na likitanci waɗanda ke buƙatar ƙarfi, ƙarfi da aminci.Sabili da haka, ƙirƙira titanium ba wai kawai yana buƙatar daidaiton girman girman girma ba, har ma yana buƙatar kyakkyawan aiki da kwanciyar hankali.Sabili da haka, a cikin tsarin masana'anta na ƙirƙira titanium, dole ne a yi amfani da halayen haɗin gwal na titanium gabaɗaya don samun ingantattun ƙirƙira.Kayan titanium abu ne mai wuyar ƙirƙira wanda ke da saurin fashewa.Sabili da haka, abu mafi mahimmanci a cikin samar da kayan aikin titanium shine don sarrafa yanayin ƙirƙira da kyau da nakasar filastik.
Yankunan aikace-aikace na ƙirƙira gami da ƙarfe na titanium:
Jirgin sama
Ana amfani da 50% na kayan titanium a duniya a filin sararin samaniya.Kashi 30% na jikin jirgin soja na amfani da alluran titanium, kuma adadin titanium a cikin jiragen farar hula shima yana karuwa a hankali.A cikin sararin samaniya, ana amfani da injunan ƙarfe na ƙarfe na titanium a cikin tankunan mai don roka da injunan motsa jiki na tauraron dan adam, gidaje masu sarrafa halayen injin, vanes don famfo mai turbo mai ruwa da sassan shigar da famfo.
Turbine ruwan wukake don samar da wutar lantarki
Ƙara tsayin wuka na injin turbin wutar lantarki shine ma'auni mai tasiri don inganta ƙarfin samar da wutar lantarki, amma tsawaita ruwan wukake zai ƙara nauyin rotor.